DFM, drawing check, cost and a full NC program, in one pass. No knobs to turn. Same part in, same answer out, every time.
Two deep-dive videos showing the geometry engine, surface classification, and cost derivation in action. Real parts. Real results.
Model and drawing. UproarCNC reads the solid geometry directly: no simplification, no mesh conversion, no feature tagging.
The engine finds every wall, floor, hole, fillet and chamfer, builds the setups, picks the tooling, checks the drawing and scores DFM risk.
An interactive report with DFM, drawing check, cost and tooling, plus the NC program built in your CAM system for your programmers to review.
Every output is derived directly from geometry — not configured, not estimated. The same cost comes out every single time.
Every setup and sequence built in your CAM system: milling, turning and mill-turn. The heavy lifting is done; your programmers review and tweak.
Print dimensions tied to the model surfaces they control. See what the drawing calls out against what the geometry actually is.
Material, machining time, setup, and finishing costs broken down by operation and setup. Adjustable quantities with live recalculation.
Automated design-for-manufacturability analysis with a 0–100 score. Flags tight tolerances, thin walls, deep pockets, drill breakouts, and more.
Full recommended tooling list with diameters, lengths, and reach requirements derived directly from your geometry. No guessing.
Embedded WebGL viewer highlights features by setup, DFM risk, and wall thickness — right inside the deliverable HTML. No extra software.
Handles billet milled, billet turned, cast milled, cast turned, and plastic parts. Each process type generates the correct analysis and tooling approach.
Download your cost report, DFM analysis, and tooling list as formatted Excel files. Ready to send to your customer or buyer immediately.
UproarCNC solves a different problem for each person who touches a part.
Bad rounding strategies. Sharp internal corners. Features that can't be machined. Each one doubles your cost or triggers an ECO that costs thousands. UproarCNC checks 10 DFM categories and scores your part 0–100. You see exactly where the cost is hiding — and fix it before it ever leaves your desk.
Sending five RFQs and taking the best number isn't a strategy. UproarCNC tells you exactly what a part should cost before a single quote comes back. When quotes come in, you'll know if you're overpaying — or leaning on a supplier who priced it too low to survive.
First quote in usually wins. And if you quote wrong — too high you lose the job, too low you lose the margin. Five estimators give you five different numbers. UproarCNC gives you the same exact cost every time, derived straight from the geometry.
A customer needs to make 3 million parts a year. How many machines do they need? Run the part, get exact cycle time, match it to your machine library, model shift patterns — and tell them precisely how many machines to buy and why.
We start with a live demo — we'll walk you through exactly what UproarCNC does and how it works. If it's a fit, send us 2-3 of your everyday production parts and we'll run them live and review the results with you together.
This isn't a free part-running service. It's a conversation about whether UproarCNC solves your problem.